Constructed out of Powder Coated Aluminum Alloy box section. The flooring is Aluminum tread plate with toe board, Fitted with PVC covered foam buffering and soft rubber rollers. Complete structure is shot blasted, zinc flame sprayed and epoxy painted. (Shade approved by Client). Provided with Castors. Complete paneling in Aluminum. Power Reelers are provided for winding of Primary and secondary wires.
Rope winding / unwinding onto power reelers fitted below the winches for both, main suspension and secondary safety wire. Wire Ropes- One No. Main suspension ropes One No. Secondary (safety) suspension rope.,Size: Dia. 8mm, 6 x 19 Galvanized. Factor of Safety minimum 1/8.
Torque Limiters provided for slack free reeving Traction hoist is provided with a lever for easy descent in case of power failure. Central control in the cradle for traction hoists with IP-55 protection, Main Switch, Phase Protection & Push Buttons.
There are four types of Cradles:
1) Solo Power Cradle
2) Two Man Power Cradle (Standard Cradle)
3) Slewing Power Cradle
4) Articulated Power Cradle
|  | Solo Power Cradle
| Capacity | One Man / One Operative- 120 Kg. Safe working load. | | Power Requirement | 3 Phase, 440V 50 Hz, 16 Amp | | Size of Cradle | Overall dimension of 650 mm Long Width over rails 635 mm. | | Traction Hoist | Compact-S Traction-Hoist of capacity 400kg | | Brakes | 1 No. of capacity 500 kg. each | | Motor | Winches fitted with 0.55 kW Motor,220 - 240V, 1 phase 50 Hz supply. IP-55 construction | | Climbing Speed | 8m / min | | | | |  | Two Man Power Cradle (Standard Cradle)
| Capacity | Two Man / Two Operatives- 240 Kg. Safe working load. | | Power Requirement | Plug and Socket outlet 5 pin (IP 64 protected)- 415V, 3 phase, 50Hz. 20 Amps. | | Cable required at site | PVC copper flexible cable 6 core x 2.5 Sq mm. Length as per size condition. | | Size of Cradle | Overall dimension of 2300 mm long.width over rails 700 mm. | | Construction | Constructed out of MS-box section. The flooring is Aluminum chequered plate with toe board; Fitted with PVC covered foam buffering & Rubber Rollers. Provided with two no. slewing and two no. fixed position Castors. Complete paneling in SS perforated sheet. | | Traction Hoist | Two number Power Winches of capacity of more than 400 Kg. each. | | Motor | Winches fitted with 0.75KW Motor, 415V, 3-Phase 50 Hz supply. (as Per EN 1808) | | Climbing Speed | 8.5 M/Min | | | | |  | Slewing Power Cradle
Power operated slewing cradles have the distinct advantage over conventional / standard cradle that they can be used to access recessed or depressed portion of building. Built on the same principle of power cradles, it basically consists of outer and inner frames. Inner frame is the working area, which is pivoted on the outer frame
Important Featyre are:
- World’s most popular imported traction hoist is provided with central control facility for easy to use and auto reset buttons.
- Traction hoist is provided with a lever for easy descent in case of power failure.
- Brakes are provided on separate secondary wires. They are capable of taking 100% load.
- Two pairs of suspension wire 8mm dia., 6x19 construction and galvanized for longer life.
- Cradle is capable of carrying 180 Kg live load (SWL) which is two persons weighing 70 Kg each plus 40 kg additional load with SS304 cladding with perforated sheet & Aluminum checker plates. SS304 cladding & steel stirrup for Titan Winches with slack Rope & over speed 4 nos., heavy duty Castors, 2 nos. slewing & 2 nos. fixed. All hardware used is in stainless steel of A2-70 specification.
- Sleeve Ring Bearing – ID 140 / 150 with 16 nos. hole & Gear Pentium Bearing.
| | | |  | Articulated Power Cradle
| Capacity | Two Men / Two Operatives-240 Kgs. Safe working load. | | Power Requirement | 220V 3-Phase,50Hz,16Amps | | Size of Cradle | 2000mm L x700mm W x1100 mm H | | Construction | Constructed out of Powder Coated Aluminum Alloy box section. The flooring is Aluminum tread plate with toe board, Fitted with PVC covered foam buffering and soft rubber rollers. Complete structure is shot blasted, zinc flame sprayed and epoxy painted. (Shade approved by Client). Provided with Castors. Complete paneling in Aluminum | | Winches | 2 Nos. Electric Winches (along with motors) of capacity 500 Kg. | | Climbing Speed | 9M / Min. | | Brakes | Two No. of capacity 500 Kg each. | | Articulation | 2.2 meter hydraulic articulation by cradle operator | | Motor | Winches fitted with 0.75 KW Motor, 220V 3 phase 50 Hz supply. | | |
